Sodium methyl oleoyl taurate (SMOT) is a mild anionic surfactant used in shampoos, facial cleansers, body washes and baby washes. It is the sodium salt of the amide formed from oleic acid and N-methyltaurine. Because it is a taurate (a sulfonate, not a sulfate), it is widely used in “sulfate-free” products. Here is what the safety evidence says, and what it does not say.
Short answer
Yes, when it is used as cosmetics normally use it. The US Cosmetic Ingredient Review (CIR) Expert Panel reviewed 20 alkyl taurate amides and taurate salts, including sodium methyl oleoyl taurate. Its final report (released 8 February 2016) concluded they are safe in cosmetics in the present practices of use and concentration when formulated to be non-irritating. The phrase “when formulated to be non-irritating” matters: like all surfactants, SMOT can irritate if the finished product is badly balanced or too concentrated.
Key data from the CIR report
| Point | Finding |
|---|---|
| Highest reported use level | 28% in bath products, the highest in the taurate group |
| Eye irritation (rabbits) | Score 2 of 4 at 1%, not considered an ocular irritant at that level; mild ocular irritant undiluted (100%) |
| Overall conclusion | Safe as used when formulated to be non-irritating |
| Other US uses reviewed | Component of food-contact paper and paperboard (21 CFR 176.170, 176.180); inert ingredient in pesticides, exempt from a tolerance (40 CFR 180.910, 180.930) |
Why it is considered mild
- Chemistry: the N-methyltaurine head group is a sulfonate attached through an amide bond. It is not a sulfate ester like SLS, and it is not ethoxylated like SLES, so 1,4-dioxane is not a by-product of its manufacture.
- Use pattern: it is mostly used in rinse-off products, where contact with skin is short.
- Formulation: it is usually combined with amphoteric surfactants (such as cocamidopropyl betaine) or nonionic surfactants, which lowers irritation further.
Who should still be careful
- People with damaged skin, eczema or very sensitive skin can react to any cleansing surfactant, including mild ones.
- Keep cleansers out of the eyes. Concentrated raw material is an eye irritant.
- Brands making “sensitive” or baby claims should test the finished product (for example, repeat-insult patch tests and in-vitro eye irritation tests). The ingredient’s reputation alone is not proof.
How it compares with other cleansers
| Surfactant | Type | Typical position |
|---|---|---|
| Sodium lauryl sulfate (SLS) | Sulfate | Strong cleanser; more irritating at equal concentration |
| Sodium laureth sulfate (SLES) | Ethoxylated sulfate | Milder than SLS; 1,4-dioxane must be controlled |
| Sodium methyl oleoyl / cocoyl taurate | Taurate (sulfate-free) | Mild; common in sulfate-free shampoos and cleansers |
| Coco-glucoside, decyl glucoside | Nonionic (APG) | Very mild co-surfactants; less foam alone |
For formulators and buyers
Green Agrochem supplies sodium methyl oleoyl taurate (GAC-SMOT) with TDS, SDS and COA. Typical properties: clear to pale yellow liquid, pH 7.0–9.0 (1%), density 1.0–1.1 g/cm³. See the SMOT product page for uses, alternatives and supply.
Reference
Cosmetic Ingredient Review. Safety Assessment of Alkyl Taurate Amides and Taurate Salts as Used in Cosmetics. Final Report, released 8 February 2016.















