Liquid sodium lignosulfonate for concrete is a ready-to-blend water reducer. This page is about choosing and handling the sodium liquid: which grade to use, how to convert dosages between liquid and dry, and how to store it. For how lignosulfonate admixtures work in general, see liquid lignosulfonate as a concrete admixture.
Choosing a Sodium Liquid Grade
| Grade (code) | pH | Reducing sugar | Water-insoluble | Choose when |
|---|---|---|---|---|
| Grade One (GAC-NaLS-L) | 7.0 – 11.0 | around 7% | 1% max | You want a water reducer with moderate retardation |
| Grade Two (GAC-NaLS-L-2) | 9.0 – 13.0 | around 4% | 2.5% max | Your blend is alkaline and needs low sugar |
| Grade Three (GAC-NaLS-L-3) | 4.0 – 7.0 | around 14% | 2.5% max | You need more set retardation |
Sugar is the main driver of retardation. Sodium grades are preferred over calcium where calcium ions are unwanted in the blend; otherwise calcium liquid is a common alternative.
Converting Dosages
Admixture dosages are normally given as dry solids by weight of cement (bwoc). To convert to liquid:
| Dry dose (bwoc) | Liquid at 45% solids | Per 100 kg cement |
|---|---|---|
| 0.20% | 0.44% | 0.44 kg liquid |
| 0.25% | 0.56% | 0.56 kg liquid |
| 0.30% | 0.67% | 0.67 kg liquid |
Count the water in the liquid in the mix water: 0.56 kg of liquid carries about 0.31 kg of water.
Storage and Handling
- Shelf life is 12 months in sealed containers (TDS). Protect from freezing.
- Mix or circulate tanks before use after long storage.
- Use stainless steel, plastic or lined tanks and check pumps and filters for any insoluble residue.
- Avoid mist inhalation and eye or skin contact; follow the SDS.
Trial Checklist
- Confirm the grade TDS and request a sample with its COA.
- Prepare the admixture blend and check it stays stable (no separation) over the planned storage time.
- Run trial mixes at three dosages with your cement and aggregates.
- Measure slump and slump loss, air content, setting time and strength against a control.
- Fix the dosage and the acceptance tests for incoming batches.
Frequently Asked Questions
What is the dosage of liquid sodium lignosulfonate in concrete?
Start within 0.20 – 0.30% dry solids by weight of cement, which is about 0.44 – 0.67% of a 45% solids liquid. Confirm by trial mixes.
Which liquid sodium lignosulfonate grade retards concrete most?
Grade Three, which has around 14% reducing sugar. Grade Two has the least sugar (around 4%).
Can liquid sodium lignosulfonate be stored outdoors?
Only if it is protected from freezing and direct heat. Keep containers closed and circulate before use.
Is sodium or calcium lignosulfonate better for concrete?
Both work as water reducers. Sodium is chosen where calcium ions are unwanted or for better solubility in blends; calcium is common and cost-effective.















